von Michael » Di 17. Mai 2016, 17:20
Hi Andy,
well, not the best one, but here we go:
Picture 1:
Connect yellow with yellow and red with red cable at both heating grips.
Both wires (9) needs to be connected with same color to remaining connectors.
The black wire needs to be connected to Minus.
Red wire needs to be connected to a switched Plus (e.g. park light), to avoid unwanted discharge of the battery.
Picture 2:
MTP Racing heating grips
fits 22mm steering bars
included:
red: 1x grip unit (1) with switch and holder, featuring miniature screw
blue: 1x grip unit (2) with throttle actuator and holder, featuring miniature screw
black: 2x chromed end caps
red: 1x plastic ringwith inner and outer edges (4) for left unit
blue: 1x plastic ring with only outer edge (5) for right unit
black: 2x plastic rings (adapter for end of steering bar) with outer thread (6), one per side
blue: 1x plastic ring with gap for throttle cable and outer edge (right)
blue: 1x plastic ring with recessed diameter and inner and outer edge (8) right hand side
black: 2x wires with connectors (9)
black: 1x hex key [for Allen head] (10) for miniature screws of holders [first two items]
Good luck,
Michael
Hi Andy,
well, not the best one, but here we go:
Picture 1:
Connect yellow with yellow and red with red cable at both heating grips.
Both wires (9) needs to be connected with same color to remaining connectors.
The black wire needs to be connected to Minus.
Red wire needs to be connected to a switched Plus (e.g. park light), to avoid unwanted discharge of the battery.
Picture 2:
MTP Racing heating grips
fits 22mm steering bars
included:
red: 1x grip unit (1) with switch and holder, featuring miniature screw
blue: 1x grip unit (2) with throttle actuator and holder, featuring miniature screw
black: 2x chromed end caps
red: 1x plastic ringwith inner and outer edges (4) for left unit
blue: 1x plastic ring with only outer edge (5) for right unit
black: 2x plastic rings (adapter for end of steering bar) with outer thread (6), one per side
blue: 1x plastic ring with gap for throttle cable and outer edge (right)
blue: 1x plastic ring with recessed diameter and inner and outer edge (8) right hand side
black: 2x wires with connectors (9)
black: 1x hex key [for Allen head] (10) for miniature screws of holders [first two items]
Good luck,
Michael