Suche "Shims""
Verfasst: Do 7. Feb 2013, 10:43
Hallo, suche für meine LTD 2 240. Shims.
Jemand welsche übrig??
Gruß
Teo
Jemand welsche übrig??
Gruß
Teo
Seite 1 von 1
RE: Suche "Shims""
Verfasst: Do 7. Feb 2013, 21:53
Moin über nicht aber bei www.bikemaster900.de wird dir geholfen! Der Marian hat bestimmt welche für kleines Geld.Gruß Holger www.hb-custom.de
RE: Suche "Shims""
Verfasst: Di 12. Feb 2013, 16:04
Hi, Holger
danke für den Link, aber Bikemaster hat die Größe leider nicht.
Gruß Teo
danke für den Link, aber Bikemaster hat die Größe leider nicht.
Gruß Teo
RE: Suche "Shims""
Verfasst: Di 12. Feb 2013, 22:48
Hi Teo,
ich habe die leider auch nicht.
Habe entsprechend einem Tipp hier im Forum mal bei einem Shimhersteller in Australien nachgefragt.
www.precisionshims.com.au
They have 32mm shims from 2.00mm to 4.00mm in 0.02 increments.
Hier die Antwort zu einem möglichen Shim-Paket.
Bestückung kann individuell angepasst werden.
-------------------------------------------------
hi michael
i have the shims, they are $5.00 ea australian so for 2.00mm thick to 2.50mm thick in .02 increments x 4 each size = 104 shims
@ $5.00 each australian = $520.00 australian plus a box $9.00 plus postage about $77.00 australian = $606.00
the postage @77.00 has tracking and is about 3 days away.
Regards
Chris Bullen
Precision Shims Australia
4 Fay Court Croydon VIC 3136
Melbourne Australia
ph 613 9723 0199
fax 613 9723 2759
email "sein vorname"@precisionshims.com.au
web www.precisionshims.com.au
--------------------------------
Im Kawa Twin Owners Forum habe ich auch einen Eintrag von "robertwf"
dazu gefunden:
Regarding the www.precisionshims.com.au site, I can have a chat with them (I'm in australia) and work out what would be a half decent economy of scale.
Are there particular sizes that are more commonly used? I could end up getting a job lot done if there is enough interest and post to members in UK and USA (or elsewhere) It could be that getting a lot done that were good and then sending them to a 'reputable member' in each country to be disbursed as need could cut a lot of postage costs. maybe too hard to organise but its worth a shot.
---------------------------------
und hier sein Nachtrag vom 1. Feb. 2013:
Chatted with Chris at Precision Shims here in Australia, and the price was pretty much the same as above at $500 for the 72 piece set
Dropping a few sizes either end (2.90 through to 2.30) took it below $400.
He seemed pretty nice and did add that they keep nearly all these in stock and could ship straight away. Would even sell individual shims (Can't see them costing $7 each this way though)
But if you need say, just a single 2.80, two 2.75 and a 2.70 for instance to reshim your bike, they may be able to ship just them. They have them in stock.
--------------------------------------------------------------
Wie also der Preis final aussieht und wie der Bezugsweg ist, ist noch ungeklärt. Ich bleibe dran und starte mal eine Umfrage ;-)
LG, Michael
ich habe die leider auch nicht.
Habe entsprechend einem Tipp hier im Forum mal bei einem Shimhersteller in Australien nachgefragt.
www.precisionshims.com.au
They have 32mm shims from 2.00mm to 4.00mm in 0.02 increments.
Hier die Antwort zu einem möglichen Shim-Paket.
Bestückung kann individuell angepasst werden.
-------------------------------------------------
hi michael
i have the shims, they are $5.00 ea australian so for 2.00mm thick to 2.50mm thick in .02 increments x 4 each size = 104 shims
@ $5.00 each australian = $520.00 australian plus a box $9.00 plus postage about $77.00 australian = $606.00
the postage @77.00 has tracking and is about 3 days away.
Regards
Chris Bullen
Precision Shims Australia
4 Fay Court Croydon VIC 3136
Melbourne Australia
ph 613 9723 0199
fax 613 9723 2759
email "sein vorname"@precisionshims.com.au
web www.precisionshims.com.au
--------------------------------
Im Kawa Twin Owners Forum habe ich auch einen Eintrag von "robertwf"
dazu gefunden:
Regarding the www.precisionshims.com.au site, I can have a chat with them (I'm in australia) and work out what would be a half decent economy of scale.
Are there particular sizes that are more commonly used? I could end up getting a job lot done if there is enough interest and post to members in UK and USA (or elsewhere) It could be that getting a lot done that were good and then sending them to a 'reputable member' in each country to be disbursed as need could cut a lot of postage costs. maybe too hard to organise but its worth a shot.
---------------------------------
und hier sein Nachtrag vom 1. Feb. 2013:
Chatted with Chris at Precision Shims here in Australia, and the price was pretty much the same as above at $500 for the 72 piece set
Dropping a few sizes either end (2.90 through to 2.30) took it below $400.
He seemed pretty nice and did add that they keep nearly all these in stock and could ship straight away. Would even sell individual shims (Can't see them costing $7 each this way though)
But if you need say, just a single 2.80, two 2.75 and a 2.70 for instance to reshim your bike, they may be able to ship just them. They have them in stock.
--------------------------------------------------------------
Wie also der Preis final aussieht und wie der Bezugsweg ist, ist noch ungeklärt. Ich bleibe dran und starte mal eine Umfrage ;-)
LG, Michael
RE: Suche "Shims""
Verfasst: Mi 20. Feb 2013, 22:56
Just to let you know Teo now has the shims he wanted
KK
KK
RE: Suche "Shims""
Verfasst: Do 21. Feb 2013, 21:15
Hi Andy,
that's great !
Thank you for your support
Cheers,
Michael
that's great !
Thank you for your support
Cheers,
Michael